California Road Trip

What's the perfect cure to DIY overload?  A road trip!  Just a week after finishing our dining room renovation we're in California enjoying the sun, the beach, and celebrating the beautiful wedding of our friends Katie and Dave.

We're taking the week off from DIY projects and driving from Laguna Beach to Napa.   Of course, it's not a true California vacation until you take the cheesy tourist pic.

Almost There— Dining Room

We got a ton done this weekend!  It's actually starting to look like we have a dining room again.  And, to be honest, I'm so ready for this project to be over.   Sixteen days in and I need a break from all of the dust and noise.  I need to eat at a dining room table again and not on my couch.
  
We started the weekend sanding the room and creating a dust storm.  TIP-  OPEN WINDOWS and cover the doorways when you do this.

It took a few hours to sand the drywall mud

DH looks like he's smiling as he applies drywall primer and sealer, but don't be fooled he was as miserable as I was. 

PVA Primer and Sealer preps new drywall for paint

We have wainscoting in the living room and want to continue the pattern through out the house.  measured the wall 36" from the floor and used a laser leveler and blue chalk to mark where we'd paint the blue and white paint.  

Mom and Dad lending a hand

Nine months after moving in DH and I can paint in our sleep!  We used Benjamin Moore's Santa Monica blue in a flat finish for the top of the wall, Behr's Snow Fall in semi-gloss for the wainscoting, and Behr's Swan Wing for the ceiling.  We painted the ceiling and moldings in different shades of white so that they don't blend into each other and you can easily see the crown molding's design when up against the ceiling.

After painting we tackled the coffered ceilings.  Unfortunately, DIY coffered ceilings weren't meant to be and I'm going to need a separate post to walk you through my melt down.

What DIY projects did you tackle this weekend?  How did you handle your first major construction project?

Everybody's Working For The Weekend

This weekend is going to be legendaryyyyy!  Walls are up, sanding is done and there's a laundry list of must-do's.  We're tackling the painting, the coffered ceilings, door framing, and molding.  We'll probably need a weekend to recover from the weekend.

We have walls again!

Painting Pro

Dining Room—A Slow Day

Today was just one of those days where nothing on our must-do list got crossed off.  We had a late start because of a few hiccups with the electrician who didn't have the right diameter of recessed lighting and drywalling a ceiling really sucks!    

What did we do?

All of my center load bearing boxes for the coffered ceiling are done!  Only 14 T's and corners left! 

My dad and I also tackled some of the drywall for the ceiling.   It took all of three minutes for me to utter my first curse word of the day.  Drywall really sucks!  The darn things are super heavy and its not easy screwing them into unleveled 71year old floor joists! 

While trying to recover from total muscle failure, I tackled the insulation on the exterior walls.  One of our goals for the renovation is to make the house more energy efficient.  Our walls are not framed by 2X4s so I had to find an alternative to the traditional thicker pink stuff while keeping within our budget.  We're using this super thin product called Reflectix that not only acts as insulation— has an R value of 14—but as a moisture barrier as well. 

Plenty of String—Coffered Ceiling

What was on the agenda for today?  Prep of the ceiling for recessed lighting!

I created a grid on the ceiling of the design I drew to act as a guide for the electrician.    We outsourced the electric— because I would be that DIYer who electrocutes herself— and will have recessed lighting placed in the center of the corner the squares.  

The plan

Neon string and a few nails

The project took two hours and will hopefully mitigate any faux pas with the placement of the cans.   

Ceiling Architecture

I have fallen in love with coffered ceilings!  Don't know what they are?  Neither did I until I came across the idea two days ago while Googling  "dining room ideas" for my inspiration board. 

via mainlinekitchendesign.com

Don't you just want these in your kitchen or dining room??  At first, I thought it unlikely to successfully pull this off with 8 ft ceilings.  But after some online research and measuring the beams currently in my not-yet-done office, I decided that it's doable— especially when I'm determined to get it done! 

Yep, that's my determined face

Coffered ceilings have become my obsession for the past two days.  First I found amazing DIY instructions written by Gary Katz, which you can find here.  I measured the room, designed a grid, and went shopping!

This is where math class really pays off

It didn't take long to convince DH to let me take a stab at this especially after receiving a $4,800 quote from a very nice carpenter!  Yep, double my total budget for this room!!  

A new nail gun, some finger jointed pine, and an hour later I built a quarter of my first anchor! 

Only 16 more to go!

I'm so excited to take this on!  Do you think I can do it or am I off my rocker?

DIY Curtains—Grommets

I was super psyched last week when I actually not only learned how to sew, but I successfully sewed my first pair of curtain panels— you can read about it here.  I really wanted grommet curtains and after some online research I learned that I wouldn't need a grommet tool or a lot of money to achieve the look.

But, in case I failed, I did consider other styles that don't require cutting the panels.

Rod-pocket curtains are made with a casing (a hole in the hem) that you can slip the curtain rod through.  No cutting, no sewing!

via outdoordrapes.com

I was also familiar with the ring-top curtains which are hung on curtains rings that are attached to the panels.   Once again this option is sewing-free!

via houzz.com

Ring-top and rod-pocket are nice, but they're not the look I'm going for in the living room.  Here's how I made grommet curtains.

Note:   Remember, you need at least a 4" wide top hem for grommet curtains.  My curtain panels, once completely sewn, are 42" wide so I used 6 grommets spacing them every 4 3/4".  

Step 1: For the first grommet measure at least 1" from the side hem, and 1 1/2" from the top of the hem.  Use the design tool included in the grommet kit to draw a perfect circle.  TIP: Use a pencil as a pen could bleed to a visible area of the fabric.

Step 2: Cut the circle you just drew with a pair of really good scissors.  

Step 3:  Insert the toothless grommet underneath the panel and work the opening around the grommet rim.

Step 4: Press the grommet together—you should hear a clicking noise.  And that's it!  You just completed your first grommet!

Step 5: Place a grommet over the design tool.  With a measuring tape place the design tool and grommet in your previously calculated distance—  for my panels it was 4 3/7".  Once in the desired location, place the grommet at 1 1/2" from the top of your 4" hem.   Remove the grommet and draw your circle.  Repeat steps 2, 3, and 4.

And that's how you get beautiful grommet curtains!

Dollars and Cents: 
I bought one grommet package every day in order to take advantage of JoAnn's 50% off coupons— it seems like the only way to get a deal in that store!

A package of 8 grommets sells for $12.99, with my 50% off coupon I purchased 5 packages for $35.